|
|
'94 -'98 Dodge
Ram 5.9 6BTA
The fuel stop plate that controls
the fuel quantity of the Bosch P7100 fuel pump that is the heart of the
Cummins engine performance. We offer different ramp designs of the
fuel stop plate that result in 30 to 100 hp and 70 to 200 lbs of torque
increase. The kit comes with a calibrated orifice that improves your turbo
performance. |
$225 |
 |
Flowed
turbine housing for low and high rpm boost control to match your
engine for maximum air flow. Wastegated and nonwastegated housings available
to match high horsepower engines. |
Starting at $170 |
 |
The
ATS three piece pulse manifold for the Dodge Cummins application
with its pulse exhaust flow design, increases exhaust gas efficiency
helping to spool up the turbocharger sooner with less exhaust
back-pressure.
This pulse manifold design eliminates the problems that persist with the
stock manifold in both 12 and 24 valve engines, that is namely the
shrinking and breaking of the manifolds. |
$460 |
 |
Trany
Valve Body
Performance tuned transmission valve body controls converter clutch
pressure and maintains good shifting patterns. Increases the transmission
and torque converters ability to handle torque-n-power. Recommenced
for engines above 210 Hp. |
$472 |
|
|
The
BD AutoLoc is a computer that commands the torque converter lock-up
clutch to stay applied when the exhaust brake is engaged. This allows
100% of the retarding force to be transferred in 3rd and 4th gears, and,
transmission oil temperatures remain low because converter slippage no
longer occurs in these gears. The lock up clutch and brake automatically
disengages once below 25 mph. |
$249 |
 |
The
BD Performance Torque converter has been engineered to more efficiently
use the torque developed by the Cummins 6BTA Engine.
50 lbs ft of torque is lost in your stock converter. BD converters
are tuned to your engine, built for heavy loads and high torque engines. |
$1149 |
 |
The increase in air flow that the K
& N washable filter provides will improve power and increase
mileage. |
$74.95 |
|

|
Benefits of installing the XMonitor *Operating pressures and
temperatures can easily be read with a simple glance.
*The display brightness can be set for driver comfort
*The peak operating levels can be set to flash warning for safety
*The low mount does not restrict vision
*Peak levels are saved in memory and can be viewed after the trip |
$379 |